Construction technology of three-dimensional vegetation net

⑴Laying The three-dimensional vegetation net is laid on the slope from top to bottom along the slope, and the net and the slope are kept smoothly combined.

(2) Pre-embedded three-dimensional mesh should be extended by 40-80cm when it is laid on the top of the slope, buried in the soil and compacted.

(3) Anchoring The three-dimensional mesh is fixed from bottom to top with U-shaped steel bars above ф6mm. The U-shaped steel bars are about 15-30cm long, about 8mm wide, and the spacing between U-shaped steel bars is about 1.5-2.5m. Use 8﹟U-shaped steel bars in the middle. Iron nails or bamboo nails for auxiliary fixation.

⑷Covering soil After the three-dimensional vegetation net is laid, evenly cover the soil on the three-dimensional vegetation net, cover the net bag until there is no empty bag, and ensure that the thickness of the soil on the three-dimensional vegetation net is not less than 12mm. Then the fertilizer, auxin and cement are mixed evenly in a certain proportion and applied to the surface layer. The fertilizer is nitrogen:phosphorus:potassium=15:15:15 or nitrogen:phosphorus:potassium=10:8:7 compound fertilizer and organic matter containing N, and the fertilizer amount is about 30-50g/㎡. After the spraying construction is completed, regular maintenance is carried out until the lawn is flat. When the lawn grows to about 5cm, the non-woven fabric can be uncovered.